Effusion and Diffusion of Gases, Gases | Chemistry 2e

Learning objectives

By the end of this section, you will be able to:

Define and explain effusion and diffusion
State Graham’s law and use it to compute relevant gas properties

If you have ever been in a room when a piping hot pizza was delivered, you have been made aware of the fact that gaseous molecules can quickly spread throughout a room, as evidenced by the pleasant aroma that soon reaches your nose. Although gaseous molecules travel at tremendous speeds (hundreds of meters per second), they collide with other gaseous molecules and travel in many different directions before reaching the desired target. At room temperature, a gaseous molecule will experience billions of collisions per second. The mean free path is the average distance a molecule travels between collisions. The mean free path increases with decreasing pressure; in general, the mean free path for a gaseous molecule will be hundreds of times the diameter of the molecule

In general, we know that when a sample of gas is introduced to one part of a closed container, its molecules very quickly disperse throughout the container; this process by which molecules disperse in space in response to differences in concentration is called diffusion (shown in CNX_Chem_09_04_Diffusion). The gaseous atoms or molecules are, of course, unaware of any concentration gradient, they simply move randomly—regions of higher concentration have more particles than regions of lower concentrations, and so a net movement of species from high to low concentration areas takes place. In a closed environment, diffusion will ultimately result in equal concentrations of gas throughout, as depicted in CNX_Chem_09_04_Diffusion. The gaseous atoms and molecules continue to move, but since their concentrations are the same in both bulbs, the rates of transfer between the bulbs are equal (no net transfer of molecules occurs).

View original figure (external; image not reproduced in this text edition)

Original figure description: In this figure, three pairs of gas filled spheres or vessels are shown connected with a stopcock between them. In a, the figure is labeled, “Stopcock closed.” Above, the left sphere is labeled, “H subscript 2.” It contains approximately 30 small, white, evenly distributed circles. The sphere to its right is labeled, “O subscript 2.” It contains approximately 30 small red evenly distributed circles. In b, the figure is labeled, “Stopcock open.” The stopcock valve handle is now parallel to the tube connecting the two spheres. On the left, approximately 9 small, white circles and 4 small, red circles are present, with the red spheres appearing slightly closer to the stopcock. On the right side, approximately 25 small, red spheres and 21 small, white spheres are present, with the concentration of white spheres slightly greater near the stopcock. In c, the figure is labeled “Some time after Stopcock open.” In this situation, the red and white spheres appear evenly mixed and uniformly distributed throughout both spheres.

(a) Two gases, H₂ and O₂, are initially separated. (b) When the stopcock is opened, they mix together. The lighter gas, H₂, passes through the opening faster than O₂, so just after the stopcock is opened, more H₂ molecules move to the O₂ side than O₂ molecules move to the H₂ side. (c) After a short time, both the slower-moving O₂ molecules and the faster-moving H₂ molecules have distributed themselves evenly on both sides of the vessel.

We are often interested in the rate of diffusion, the amount of gas passing through some area per unit time:

rate of diffusion = \frac{amount of gas passing through an area}{unit of time}

The diffusion rate depends on several factors: temperature; the mass of the atoms or molecules; the concentration gradient (the increase or decrease in concentration from one point to another); the amount of surface area available for diffusion; and the distance the gas particles must travel. Note also that the time required for diffusion to occur is inversely proportional to the rate of diffusion, as shown in the rate of diffusion equation.

A process involving movement of gaseous species similar to diffusion is effusion, the escape of gas molecules through a tiny hole such as a pinhole in a balloon into a vacuum (CNX_Chem_09_04_DiffEff). Although diffusion and effusion rates both depend on the molar mass of the gas involved, their rates are not equal; however, the ratios of their rates are the same.

View original figure (external; image not reproduced in this text edition)

Original figure description: This figure contains two cylindrical containers which are oriented horizontally. The first is labeled “Diffusion.” In this container, approximately 25 purple and 25 green circles are shown, evenly distributed throughout the container. “Trails” behind some of the circles indicate motion. In the second container, which is labeled “Effusion,” a boundary layer is evident across the center of the cylindrical container, dividing the cylinder into two halves. A black arrow is drawn pointing through this boundary from left to right. To the left of the boundary, approximately 16 green circles and 20 purple circles are shown again with motion indicated by “trails” behind some of the circles. To the right of the boundary, only 4 purple and 16 green circles are shown.

Diffusion involves the unrestricted dispersal of molecules throughout space due to their random motion. When this process is restricted to passage of molecules through very small openings in a physical barrier, the process is called effusion.

If a mixture of gases is placed in a container with porous walls, the gases effuse through the small openings in the walls. The lighter gases pass through the small openings more rapidly (at a higher rate) than the heavier ones (CNX_Chem_09_04_Effusion2). In 1832, Thomas Graham studied the rates of effusion of different gases and formulated Graham’s law of effusion: The rate of effusion of a gas is inversely proportional to the square root of its molar mass:

rate of effusion \propto \frac{1}{\sqrt{ℳ}}

This means that if two gases A and B are at the same temperature and pressure, the ratio of their effusion rates is inversely proportional to the ratio of the square roots of their molar masses:

\frac{rate of effusion of A}{rate of effusion of B} = \frac{\sqrt{ℳ_{B}}}{\sqrt{ℳ_{A}}}

View original figure (external; image not reproduced in this text edition)

Original figure description: This figure shows two photos. The first photo shows an inflated orange balloon and an inflated blue balloon. Both balloons are about the same size. The second photo shows the same two balloons, but the orange one is now smaller than the blue one.

The left photograph shows two balloons inflated with different gases, helium (orange) and argon (blue).The right-side photograph shows the balloons approximately 12 hours after being filled, at which time the helium balloon has become noticeably more deflated than the argon balloon, due to the greater effusion rate of the lighter helium gas. (credit: modification of work by Paul Flowers)

Applying Graham’s Law to Rates of Effusion

Calculate the ratio of the rate of effusion of hydrogen to the rate of effusion of oxygen.

Solution

From Graham’s law, we have:

\frac{rate of effusion of hydrogen}{rate of effusion of oxygen} = \frac{\sqrt{32 {g mol}^{−1}}}{\sqrt{2 {g mol}^{−1}}} = \frac{\sqrt{16}}{\sqrt{1}} = \frac{4}{1}

Hydrogen effuses four times as rapidly as oxygen.

Check Your Learning

At a particular pressure and temperature, nitrogen gas effuses at the rate of 79 mL/s. Under the same conditions, at what rate will sulfur dioxide effuse?

Effusion Time Calculations

It takes 243 s for 4.46

\times

10⁻⁵ mol Xe to effuse through a tiny hole. Under the same conditions, how long will it take 4.46

\times

10⁻⁵ mol Ne to effuse?

Solution

It is important to resist the temptation to use the times directly, and to remember how rate relates to time as well as how it relates to mass. Recall the definition of rate of effusion:

rate of effusion = \frac{amount of gas transferred}{time}

and combine it with Graham’s law:

\frac{rate of effusion of gas Xe}{rate of effusion of gas Ne} = \frac{\sqrt{ℳ_{Ne}}}{\sqrt{ℳ_{Xe}}}

To get:

\frac{\frac{amount of Xe transferred}{time for Xe}}{\frac{amount of Ne transferred}{time for Ne}} = \frac{\sqrt{ℳ_{Ne}}}{\sqrt{ℳ_{Xe}}}

Noting that amount of A = amount of B, and solving for time for Ne:

\frac{\frac{amount of Xe}{time for Xe}}{\frac{amount of Ne}{time for Ne}} = \frac{time for Ne}{time for Xe} = \frac{\sqrt{ℳ_{Ne}}}{\sqrt{ℳ_{Xe}}} = \frac{\sqrt{ℳ_{Ne}}}{\sqrt{ℳ_{Xe}}}

and substitute values:

\frac{time for Ne}{243 s} = \sqrt{\frac{20.2 g mol}{131.3 g mol}} = 0.392

Finally, solve for the desired quantity:

time for Ne = 0.392 \times 243 s = 95.3 s

Note that this answer is reasonable: Since Ne is lighter than Xe, the effusion rate for Ne will be larger than that for Xe, which means the time of effusion for Ne will be smaller than that for Xe.

Check Your Learning

A party balloon filled with helium deflates to

\frac{2}{3}

of its original volume in 8.0 hours. How long will it take an identical balloon filled with the same number of moles of air (ℳ = 28.2 g/mol) to deflate to

\frac{1}{2}

of its original volume?

Determining Molar Mass Using Graham’s Law

An unknown gas effuses 1.66 times more rapidly than CO₂. What is the molar mass of the unknown gas? Can you make a reasonable guess as to its identity?

Solution

From Graham’s law, we have:

\frac{rate of effusion of Unknown}{{rate of effusion of CO}_{2}} = \frac{\sqrt{ℳ_{{CO}_{2}}}}{\sqrt{ℳ_{U n k n o w n}}}

Plug in known data:

\frac{1.66}{1} = \frac{\sqrt{44.0 g/mol}}{\sqrt{ℳ_{U n k n o w n}}}

Solve:

ℳ_{U n k n o w n} = \frac{44.0 g/mol}{{(1.66)}^{2}} = 16.0 g/mol

The gas could well be CH₄, the only gas with this molar mass.

Check Your Learning

Hydrogen gas effuses through a porous container 8.97-times faster than an unknown gas. Estimate the molar mass of the unknown gas.

Use of Diffusion for Nuclear Energy Applications: Uranium Enrichment

Gaseous diffusion has been used to produce enriched uranium for use in nuclear power plants and weapons. Naturally occurring uranium contains only 0.72% of ²³⁵U, the kind of uranium that is “fissile,” that is, capable of sustaining a nuclear fission chain reaction. Nuclear reactors require fuel that is 2–5% ²³⁵U, and nuclear bombs need even higher concentrations. One way to enrich uranium to the desired levels is to take advantage of Graham’s law. In a gaseous diffusion enrichment plant, uranium hexafluoride (UF₆, the only uranium compound that is volatile enough to work) is slowly pumped through large cylindrical vessels called diffusers, which contain porous barriers with microscopic openings. The process is one of diffusion because the other side of the barrier is not evacuated. The ²³⁵UF₆ molecules have a higher average speed and diffuse through the barrier a little faster than the heavier ²³⁸UF₆ molecules. The gas that has passed through the barrier is slightly enriched in ²³⁵UF₆ and the residual gas is slightly depleted. The small difference in molecular weights between ²³⁵UF₆ and ²³⁸UF₆ only about 0.4% enrichment, is achieved in one diffuser (CNX_Chem_09_04_GasDiff). But by connecting many diffusers in a sequence of stages (called a cascade), the desired level of enrichment can be attained.

View original figure (external; image not reproduced in this text edition)

Original figure description: This figure shows a large cylindrical container oriented horizontally. A narrow tube or pipe which is labeled “porous barrier” runs horizontally through the center of the tube and extends a short distance out from the left and right ends of the cylinder. At the far left, an arrow points right into the tube. This arrow is labele, “Uranium hexafluoride ( U F subscript 6 ).” A line segment connects the label, “High pressure feed tube,” to the tube where it enters the cylinder. In the short region of tube outside the cylinder, 5 small, purple circles and 4 small, green circles are present. Inside the cylinder, an arrow points right through the tube which contains many evenly distributed, purple circles and a handful of green circles which decrease in quantity moving left to right through the cylinder. Curved arrows extend from the inner area of the tube into the outer region of the cylinder. Three of these arrows point into the area above the tube and three point into the area below. Two line segments extend from the label, “Higher speed superscript 235 U F subscript 6 diffuses through barrier faster than superscript 238 U F subscript 6,” to two green circles in the space above the tube. In the short section of tubing just outside the cylinder, 8 small, purple circles are present. An arrow labeled, “Depleted superscript 238 U F subscript 6,” points right extending from the end of this tube. The larger space outside the tube contains approximately 100 evenly distributed small green circles and only 5 purple circles. Eight of the purple circles appear at the left end of the cylinder. A tube exits the lower right end of the cylinder. It has 5 green circles followed by a right pointing arrow and the label, “Enriched superscript 235 U F subscript 6.”

In a diffuser, gaseous UF₆ is pumped through a porous barrier, which partially separates ²³⁵UF₆ from ²³⁸UF₆ The UF₆ must pass through many large diffuser units to achieve sufficient enrichment in ²³⁵U.

The large scale separation of gaseous ²³⁵UF₆ from ²³⁸UF₆ was first done during the World War II, at the atomic energy installation in Oak Ridge, Tennessee, as part of the Manhattan Project (the development of the first atomic bomb). Although the theory is simple, this required surmounting many daunting technical challenges to make it work in practice. The barrier must have tiny, uniform holes (about 10^–6 cm in diameter) and be porous enough to produce high flow rates. All materials (the barrier, tubing, surface coatings, lubricants, and gaskets) need to be able to contain, but not react with, the highly reactive and corrosive UF₆.

Because gaseous diffusion plants require very large amounts of energy (to compress the gas to the high pressures required and drive it through the diffuser cascade, to remove the heat produced during compression, and so on), it is now being replaced by gas centrifuge technology, which requires far less energy. A current hot political issue is how to deny this technology to Iran, to prevent it from producing enough enriched uranium for them to use to make nuclear weapons.

Key Concepts and Summary

Gaseous atoms and molecules move freely and randomly through space. Diffusion is the process whereby gaseous atoms and molecules are transferred from regions of relatively high concentration to regions of relatively low concentration. Effusion is a similar process in which gaseous species pass from a container to a vacuum through very small orifices. The rates of effusion of gases are inversely proportional to the square roots of their densities or to the square roots of their atoms/molecules’ masses (Graham’s law).

Key Equations

rate of diffusion = \frac{amount of gas passing through an area}{unit of time}

\frac{rate of effusion of gas A}{rate of effusion of gas B} = \frac{\sqrt{m_{B}}}{\sqrt{m_{A}}} = \frac{\sqrt{ℳ_{B}}}{\sqrt{ℳ_{A}}}

Chemistry End of Chapter Exercises

A balloon filled with helium gas takes 6 hours to deflate to 50% of its original volume. How long will it take for an identical balloon filled with the same volume of hydrogen gas (instead of helium) to decrease its volume by 50%?

4.2 hours

Explain why the numbers of molecules are not identical in the left- and right-hand bulbs shown in the center illustration of CNX_Chem_09_04_Diffusion.

Starting with the definition of rate of effusion and Graham’s finding relating rate and molar mass, show how to derive the Graham’s law equation, relating the relative rates of effusion for two gases to their molecular masses.

Effusion can be defined as the process by which a gas escapes through a pinhole into a vacuum. Graham’s law states that with a mixture of two gases A and B: $(\frac{rate A}{rate B}) = {(\frac{molar mass of B}{molar mass of A})}^{1 / 2} .$ Both A and B are in the same container at the same temperature, and therefore will have the same kinetic energy:
${KE}_{A} = {KE}_{B} KE = \frac{1}{2} m v^{2}$
Therefore, $\frac{1}{2} m_{A} v_{A}^{2} = \frac{1}{2} m_{B} v_{B}^{2}$
$\frac{v_{A}^{2}}{v_{B}^{2}} = \frac{m_{B}}{m_{A}}$
${(\frac{v_{A}^{2}}{v_{B}^{2}})}^{1 / 2} = {(\frac{m_{B}}{m_{A}})}^{1 / 2}$
$\frac{v_{A}}{v_{B}} = {(\frac{m_{B}}{m_{A}})}^{1 / 2}$

Heavy water, D₂O (molar mass = 20.03 g mol^–1), can be separated from ordinary water, H₂O (molar mass = 18.01), as a result of the difference in the relative rates of diffusion of the molecules in the gas phase. Calculate the relative rates of diffusion of H₂O and D₂O.

Which of the following gases diffuse more slowly than oxygen? F₂, Ne, N₂O, C₂H₂, NO, Cl₂, H₂S

F₂, N₂O, Cl₂, H₂S

During the discussion of gaseous diffusion for enriching uranium, it was claimed that ²³⁵UF₆ diffuses 0.4% faster than ²³⁸UF₆. Show the calculation that supports this value. The molar mass of ²³⁵UF₆ = 235.043930 + 6 $\times$ 18.998403 = 349.034348 g/mol, and the molar mass of ²³⁸UF₆ = 238.050788 + 6 $\times$ 18.998403 = 352.041206 g/mol.

Calculate the relative rate of diffusion of ¹H₂ (molar mass 2.0 g/mol) compared with ²H₂ (molar mass 4.0 g/mol) and the relative rate of diffusion of O₂ (molar mass 32 g/mol) compared with O₃ (molar mass 48 g/mol).

1.4; 1.2

A gas of unknown identity diffuses at a rate of 83.3 mL/s in a diffusion apparatus in which carbon dioxide diffuses at the rate of 102 mL/s. Calculate the molecular mass of the unknown gas.

When two cotton plugs, one moistened with ammonia and the other with hydrochloric acid, are simultaneously inserted into opposite ends of a glass tube that is 87.0 cm long, a white ring of NH₄Cl forms where gaseous NH₃ and gaseous HCl first come into contact. ${NH}_{3} (g) + HCl (g) ⟶ {NH}_{4} Cl (s)$ At approximately what distance from the ammonia moistened plug does this occur? (Hint: Calculate the rates of diffusion for both NH₃ and HCl, and find out how much faster NH₃ diffuses than HCl.)

51.7 cm

Glossary

diffusion: movement of an atom or molecule from a region of relatively high concentration to one of relatively low concentration (discussed in this chapter with regard to gaseous species, but applicable to species in any phase)
effusion: transfer of gaseous atoms or molecules from a container to a vacuum through very small openings
Graham’s law of effusion: rates of diffusion and effusion of gases are inversely proportional to the square roots of their molecular masses
mean free path: average distance a molecule travels between collisions
rate of diffusion: amount of gas diffusing through a given area over a given time

Attribution. Chemistry 2e, OpenStax, Rice University, and the contributing authors credited in the book. Licensed under Creative Commons Attribution 4.0 International. Source revision 32c719622f of openstax/osbooks-chemistry-bundle (2026-02-04). CC BY 4.0. Original source ↗. Text edition of a pinned CC BY 4.0 source revision of the OpenStax book, converted from CNXML by the EvidenceHelix importer. Original prose, learning objectives, tables, exercises, glossary and captions are preserved; images are not copied (figures link to the original source and keep their credits). No new content was added. Later revisions of this book can carry different licence terms and are not used.