Speed of Sound, Frequency, and Wavelength

Learning objectives

Section Key Terms

Properties of Sound Waves

Sound is a wave. More specifically, sound is defined to be a disturbance of matter that is transmitted from its source outward. A disturbance is anything that is moved from its state of equilibrium. Some sound waves can be characterized as periodic waves, which means that the atoms that make up the matter experience simple harmonic motion.

A vibrating string produces a sound wave as illustrated in Figure_14_01_StringR, Figure_14_01_StringL, and Figure_14_01_Vibrations. As the string oscillates back and forth, part of the string’s energy goes into compressing and expanding the surrounding air. This creates slightly higher and lower pressures. The higher pressure... regions are compressions, and the low pressure regions are rarefactions. The pressure disturbance moves through the air as longitudinal waves with the same frequency as the string. Some of the energy is lost in the form of thermal energy transferred to the air. You may recall from the chapter on waves that areas of compression and rarefaction in longitudinal waves (such as sound) are analogous to crests and troughs in transverse waves.

The amplitude of a sound wave decreases with distance from its source, because the energy of the wave is spread over a larger and larger area. But some of the energy is also absorbed by objects, such as the eardrum in Figure_14_01_Eardrum, and some of the energy is converted to thermal energy in the air. Figure_14_01_Vibrations shows a graph of gauge pressure versus distance from the vibrating string. From this figure, you can see that the compression of a longitudinal wave is analogous to the peak of a transverse wave, and the rarefaction of a longitudinal wave is analogous to the trough of a transverse wave. Just as a transverse wave alternates between peaks and troughs, a longitudinal wave alternates between compression and rarefaction.

The Speed of Sound

The speed of sound varies greatly depending upon the medium it is traveling through. The speed of sound in a medium is determined by a combination of the medium’s rigidity (or compressibility in gases) and its density. The more rigid (or less compressible) the medium, the faster the speed of sound. The greater the density of a medium, the slower the speed of sound. The speed of sound in air is low, because air is compressible. Because liquids and solids are relatively rigid and very difficult to compress, the speed of sound in such media is generally greater than in gases. Table_14_01 shows the speed of sound in various media. Since temperature affects density, the speed of sound varies with the temperature of the medium through which it’s traveling to some extent, especially for gases.

The Relationship Between the Speed of Sound and the Frequency and Wavelength of a Sound Wave

Sound, like all waves, travels at certain speeds through different media and has the properties of frequency and wavelength. Sound travels much slower than light—you can observe this while watching a fireworks display (see Figure_14_01_fireworks), since the flash of an explosion is seen before its sound is heard.

The relationship between the speed of sound, its frequency, and wavelength is the same as for all waves:

where v is the speed of sound (in units of m/s), f is its frequency (in units of hertz), and $\lambda$ is its wavelength (in units of meters). Recall that wavelength is defined as the distance between adjacent identical parts of a wave. The wavelength of a sound, therefore, is the distance between adjacent identical parts of a sound wave. Just as the distance between adjacent crests in a transverse wave is one wavelength, the distance between adjacent compressions in a sound wave is also one wavelength, as shown in Figure_14_01_tuningFork. The frequency of a sound wave is the same as that of the source. For example, a tuning fork vibrating at a given frequency would produce sound waves that oscillate at that same frequency. The frequency of a sound is the number of waves that pass a point per unit time.

One of the more important properties of sound is that its speed is nearly independent of frequency. If this were not the case, and high-frequency sounds traveled faster, for example, then the farther you were from a band in a football stadium, the more the sound from the low-pitch instruments would lag behind the high-pitch ones. But the music from all instruments arrives in cadence independent of distance, and so all frequencies must travel at nearly the same speed.

Recall that $v=f\lambda$, and in a given medium under fixed temperature and humidity, v is constant. Therefore, the relationship between f and $\lambda$ is inverse: The higher the frequency, the shorter the wavelength of a sound wave.

The speed of sound can change when sound travels from one medium to another. However, the frequency usually remains the same because it is like a driven oscillation and maintains the frequency of the original source. If v changes and f remains the same, then the wavelength $\lambda$ must change. Since $v=f\lambda$, the higher the speed of a sound, the greater its wavelength for a given frequency.

Practice Problems

Check Your Understanding

Section Summary

• Sound is one type of wave.
• Sound is a disturbance of matter that is transmitted from its source outward in the form of longitudinal waves.
• The relationship of the speed of sound v, its frequency f, and its wavelength $\lambda$ is given by $v=f\lambda$, which is the same relationship given for all waves.
• The speed of sound depends upon the medium through which the sound wave is travelling.
• In a given medium at a specific temperature (or density), the speed of sound v is the same for all frequencies and wavelengths.

Key Equations

Concept Items

Critical Thinking

Problems

Test Prep Multiple Choice

Test Prep Short Answer

Test Prep Extended Response

Glossary

rarefaction

a low-pressure region in a sound wave

sound

a disturbance of matter that is transmitted from its source outward by longitudinal waves